Okay, so I’ve been wanting to try this & VP10 Flowerpot thing for a while now. I finally took the plunge and got everything set up. Here’s how it went down:
Getting Started
First, I gathered all the parts. I already had a PID controller and coil from a previous setup, so I mainly needed the Flowerpot head itself and some other bits and pieces. I did my research, watched some videos, and made a list of everything I needed. Then I placed my order and waited. It’s like Christmas when all that stuff finally arrives!
The Build
Once I had everything, it was time to put it together. I started with the Flowerpot * was pretty straightforward, just screwing the parts together. I then connected the coil to the head, making sure it was snug but not too tight,I’ve heard of people breaking things by over-tightening.
Next, I attached the whole assembly to my PID controller. This part was easy, just plugging in the coil. I double-checked all the connections to make sure everything was secure.
First Test
I loaded up a small amount, set my PID to my usual starting temperature and did * takes 20 seconds or so to get up to temp.
It work well!
Refining the Experience
After a few sessions, I started to get a feel for the Flowerpot. I experimented with different temperatures and draw speeds to find what worked best for me. I also tried different types, which definitely changed things up. It’s all about finding your own sweet spot.
Final Thoughts
All in all, I’m really happy with the Flowerpot. It took a little bit of effort to get it all set up and dialed in, but it was totally worth it. The flavor is * you’re thinking about trying it, I say go for it! Just do your research, take your time, and enjoy the process.
