Hey everyone, today I want to share my little project of making some wall plant stands. I’ve always loved having plants around the house, but I’m running out of floor space. So, I decided to go vertical and make some stands to hang on the wall.
First, I gathered my materials. I found some scrap wood in my garage – leftover pieces from an old project. They were just sitting there, so why not use them, right? Then I needed something to hold the wood up. I opted for some simple metal brackets I picked up from the hardware store. Nothing fancy, just the basic L-shaped ones.
Getting Started
- I started by measuring and cutting the wood. I wanted each stand to be about a foot long, just enough to hold a small pot.
- After cutting, I gave the wood a quick sanding to smooth out any rough edges. No one wants splinters, especially not from a plant stand.
- Next, I stained the wood. I chose a dark walnut color because I like how it looks against my light-colored walls. It gives it a nice, warm feel.
Once the stain was dry, I attached the brackets to the wood. This was pretty straightforward. I just screwed them into the bottom of each piece of wood. I made sure they were centered so the stand would be balanced.
Installation Time
- With the stands assembled, it was time to hang them. I found a good spot on my living room wall that gets plenty of sunlight.
- I used a level to make sure they were straight – can’t have wonky plant stands, can we?
- Then I marked where the screws would go, drilled some pilot holes, and screwed the stands into the wall. Easy peasy.
Finally, I placed my plants on the stands. I picked out some of my smaller plants that would do well in a wall-mounted setting. The result? Pretty darn good, if I do say so myself! It added a nice touch of greenery to the room without taking up any floor space. Plus, it was a fun little project that didn’t cost much at all.
So, if you’re looking for a way to display your plants and save some space, try making your own wall plant stands. It’s a simple and satisfying project, and you can customize it however you like. Trust me, if I can do it, anyone can!
