Alright, folks, gather ’round! I’ve been tinkering again, and this time I tackled a little something I’m calling my ‘flowerpot bordlampe’ – that’s a flowerpot table lamp for those not in the know. And you know me, I gotta share how it all went down.
Getting Started – The Idea Phase
So, I was looking for a new table lamp, something a bit different, you know? And I kept seeing these cool designs using everyday stuff. The idea of using a flowerpot just kinda stuck with me. Seemed simple enough, and I figured, why not give it a go? I’m all for a bit of DIY when I can.

Hunting for the Bits and Bobs
First things first, I needed supplies. My main mission: find a decent flowerpot. I didn’t want anything too fancy or too big. I toddled off to the local garden center and found a nice, sturdy ceramic one. Not too flashy, just a good solid pot. Then, it was off to the hardware store for the electrical gubbins. I picked up:
- A lamp holder kit – you know, the socket for the bulb, with a cord and a switch already on it. Made things easier.
- A bulb, of course! Went for a warm LED one.
- Some strong glue, just in case.
I already had a drill at home, which I figured I’d need.
Putting It All Together – The Fun Part!
Okay, so back in my workshop (aka the kitchen table), I laid everything out. The flowerpot I chose had a drainage hole at the bottom, which was super handy. I thought I might need to drill it bigger, but nope, the cord from the lamp kit squeezed through just fine. A bit of a tight fit, but it worked!
My plan was to have the pot as the base, with the bulb sticking out the top. So, I threaded the cord through the hole from the inside of the pot, pulling it all the way through until the lamp holder part was sitting snugly where the plant would normally go. I wanted it to be stable, so I used a bit of that strong glue around the base of the lamp holder inside the pot, just to make sure it wouldn’t wobble around. Let that dry for a bit.
Then, it was pretty straightforward. The switch was already on the cord, and so was the plug. No complicated wiring for me this time, thankfully! Sometimes these kits are a lifesaver. I just made sure the cord coming out the bottom of the pot had enough slack so the pot could sit flat.
The Big Reveal – Does It Work?
This is always the slightly nervous moment, isn’t it? I screwed in the bulb. Took a deep breath. Plugged it into the wall socket and flicked the switch. And… ta-da! Light! It actually worked, and it looked pretty neat, if I do say so myself.
The ceramic pot gives it a nice, earthy feel, and the warm bulb creates a cozy glow. It’s not gonna win any design awards, maybe, but it’s unique, and I made it. It’s now sitting proudly on my side table, doing its lamp-ly duties.

Final Thoughts
Honestly, this was a pretty easy project. The pre-wired lamp kit was a huge help. If you’re thinking of making something similar, I’d say go for it. Just make sure your pot is stable and if you have to drill, take it slow, especially with ceramic. But yeah, pretty chuffed with this little flowerpot bordlampe. Simple, effective, and a bit of fun to make!